AC6681 is a high performance VXI Bus Oscilloscope Module of 4 channels and 500MHz bandwidth, with 100Msa/s sampling rate, 1MB storage depth. It is the module of Message-base, C size and Dual-slot, and complies the Plug&Play standard. It affords the Waveform Acquisition, Waveform Parameter Measurement and Data Acquisition ability and meets the demands of the wide-band signal measurement and real time data acquisition. It is widely used in all kinds of VXI Bus Automatic Test System.
Features:
Real Time Data Acquisition, the Max.10ns sampling rate covers time range up to 10ms.
Single shot sampling in sequence, continuously acquire 1024 waveforms, suitable for the capture of continuous single events.
Repetitive sampling ability, 200Gsa/s Equivalent Sampling Rate, Average Mode Waveform Virtual Amplitude Resolution 12bit.
Standard Pulse Parameter Measurement.
512KB Storage driver for share, SCPI control command, The Driver and Virtual Control Panel are compatible with Windows9x/NT/XP.
Vertical System |
Bandwidth (-3dB) |
50Ω
|
DC~500MHz (≥10mV/div);
300MHz (10mV/div) |
1MΩ
|
250MHz |
||
Input Coupling |
DC, AC, GND |
||
Input Impedance |
50Ω,
1MΩ/12pF |
||
Max Input Voltage |
50Ω,
±5V, 1MΩ,
±250V |
||
Vertical Deflection Factor |
2mV/div~500mV/div (50Ω) 2mV/div~5V/div (1MΩ)
continuously adjustable |
||
Vertical Offset Range |
±1V (≤100mV/div)
, ±10V(≤1V/div),
±100V(≤5V/div) |
||
Horizontal system |
Time base range |
200ps/div~5s/div, continuously
adjustable |
|
Delay range |
Positive Delay (After-trigger);
Negative Delay (Pre-trigger): 10div |
||
Resolution |
5ps |
||
Equivalent Sampling Rate |
200Ga/s |
||
Trigger system |
Trigger source |
CH1~CH4, TTL external trigger, VXI
Trigger Bus (ECLTRG0~1, TTLTRG0~7) |
|
Trigger Mode |
Auto, Norm; Single Event,
Sequential Single Events, Continuous; Slope, Combined, Status, Burr, Width |
||
Hold Off Mode |
Time Hold-off: 200ns~10s; Event
Hold-off: 2~8192 |
||
Sampling system |
Max. Sampling Rate |
100Msa/s |
|
A/D Resolution |
8 bit |
||
Record Length |
1Mpts/ channel |
||
Data Processing Mode |
Singe shot, Reform,
Average(2~8092times), Envelope |
||
Input Interface |
Channel 1~4, TTL Ext. Trigger |
Standard BNC connector |
|
Output Interface |
Channel Calibration, Probe
Compensation Output |
Standard BNC connector |
|
VXI Interface |
P1, P2 connector |
Standard 96pin connector |
|
General |
Size |
LxWxH=393mmx413mmx207mm |
|
Weight |
About 2.5kg |
||
Typical Work Current |
+5V:4.5A; -5.2V:5.8A; -2V:0.4A;
+12V:0.24A; -12V:0.12A |
||
Max. Work Current |
+5V:5.5A; -5.2V/7A; -2V:1A;
+12V:0.5A; -12V:0.5A |
||
Work Temperature |
10°C~40°C |
||
Configuration |
Main Unit |
1pc |
|
Accessories |
250MHz Oscilloprobes x 4pcs |
||
|
Standard Cable (50Ω),
1pc |
||
|
Operation Manual, Programming
Manual, Software CD |